I have tried different transformers/converters, and they have all blown! I have fabulous lamps (4 of them) that I kept from the States and would really like to use them. If anyone can give me info on someone who can do rewiring or knows a good way to convert them, PLEASE!, let me know!
Thanks!
Forums in Geneva > Geneva > Know anyone who can rewire American lamps?
Only members can see names and photos
Know anyone who can rewire American lamps?
Jul 10, 2007 @ 00:37
The text you are quoting:
I have tried different transformers/converters, and they have all blown! I have fabulous lamps (4 of them) that I kept from the States and would really like to use them. If anyone can give me info on someone who can do rewiring or knows a good way to convert them, PLEASE!, let me know!
Thanks!
kimmimzJul 10, 2007 @ 00:37
Thanks!
kimmimzJul 10, 2007 @ 00:37
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 1
Jul 11, 2007 @ 17:32
Switzerland use 220 volts, 50 cycles AC, so you will require a volt converter AND adapter for your lamps.
You may want to try somewhere like the electrical section of HornBach, as they tend to cater for and have products from all over the world?
regards - Frankie
You may want to try somewhere like the electrical section of HornBach, as they tend to cater for and have products from all over the world?
regards - Frankie
The text you are quoting:
Switzerland use 220 volts, 50 cycles AC, so you will require a volt converter AND adapter for your lamps.
You may want to try somewhere like the electrical section of HornBach, as they tend to cater for and have products from all over the world?
regards - Frankie
frankie66, Jul 11, 2007 @ 17:32
You may want to try somewhere like the electrical section of HornBach, as they tend to cater for and have products from all over the world?
regards - Frankie
frankie66, Jul 11, 2007 @ 17:32
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 2
Jul 11, 2007 @ 17:54
Thanks for the tip. I will go there and see if I can find something I think I still will need to rewire at least one of the lamps, so if anyone know where to go to do that I would love to know! Would an electrician do rewiring or would it be a specialist?
Anyway, thanks again for your reply.
Anyway, thanks again for your reply.
The text you are quoting:
Thanks for the tip. I will go there and see if I can find something I think I still will need to rewire at least one of the lamps, so if anyone know where to go to do that I would love to know! Would an electrician do rewiring or would it be a specialist?
Anyway, thanks again for your reply.
kimmimz, Jul 11, 2007 @ 17:54
Anyway, thanks again for your reply.
kimmimz, Jul 11, 2007 @ 17:54
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 3
Jul 11, 2007 @ 18:30
I used them for all my electrical stuff up until my last experience. After my last experience, I will never use anyone but Kaech again. I feel their prices are fair, they are accommodating and I have found their work to be very good and efficient.
The text you are quoting:
I used them for all my electrical stuff up until my last experience. After my last experience, I will never use anyone but Kaech again. I feel their prices are fair, they are accommodating and I have found their work to be very good and efficient.
misskate, Jul 11, 2007 @ 18:30
misskate, Jul 11, 2007 @ 18:30
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 4
Jul 11, 2007 @ 18:39
Thanks so much! What happened before that was so bad? I hope you were able to fix it! I am going to check out the site right now!
The text you are quoting:
Thanks so much! What happened before that was so bad? I hope you were able to fix it! I am going to check out the site right now!
kimmimz, Jul 11, 2007 @ 18:39
kimmimz, Jul 11, 2007 @ 18:39
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 5
Jul 11, 2007 @ 19:49
because I needed a shower curatin rod installed as well. So, to have a ceiling lamp/fan and a shower curtain rod installed, they tried to bill me over CHF600. I called and they lowered the price to around CHF540.
Partly my fault, I didn't get an actual estimate beforehand, but went with what the woman said over the phone of CHF130. Plus the men diddled around for two hours on the first visit, drilled through the bathroom wall into the living room and said that they had to come back and took a part of the fan with them, so I couldn't call somebody else to finish the job. (though I don't think that that was their reason for taking the part with them, just that them taking the part meant that I couldn't call someone else.)
The company said that they speak English, which they do, on the telephone, but the men that they sent weren't English-speaking or really French-speaking, either. The work they did was fine, but I'm just not happy with the bait and switch on the cost or the man's explanation for it.
I learned a lot of lessons from this experience (what a costly learning curve, though!), number one being CALL KAECH! Next time, I will ask the electrician if he is able to jam up the shower curtain rod for me, if I pay him on the side.
Also, if you have an AEG appliance, I have a great guy who comes out in the evening time. (I don't have his number handy, though, so message me).
Partly my fault, I didn't get an actual estimate beforehand, but went with what the woman said over the phone of CHF130. Plus the men diddled around for two hours on the first visit, drilled through the bathroom wall into the living room and said that they had to come back and took a part of the fan with them, so I couldn't call somebody else to finish the job. (though I don't think that that was their reason for taking the part with them, just that them taking the part meant that I couldn't call someone else.)
The company said that they speak English, which they do, on the telephone, but the men that they sent weren't English-speaking or really French-speaking, either. The work they did was fine, but I'm just not happy with the bait and switch on the cost or the man's explanation for it.
I learned a lot of lessons from this experience (what a costly learning curve, though!), number one being CALL KAECH! Next time, I will ask the electrician if he is able to jam up the shower curtain rod for me, if I pay him on the side.
Also, if you have an AEG appliance, I have a great guy who comes out in the evening time. (I don't have his number handy, though, so message me).
The text you are quoting:
because I needed a shower curatin rod installed as well. So, to have a ceiling lamp/fan and a shower curtain rod installed, they tried to bill me over CHF600. I called and they lowered the price to around CHF540.
Partly my fault, I didn't get an actual estimate beforehand, but went with what the woman said over the phone of CHF130. Plus the men diddled around for two hours on the first visit, drilled through the bathroom wall into the living room and said that they had to come back and took a part of the fan with them, so I couldn't call somebody else to finish the job. (though I don't think that that was their reason for taking the part with them, just that them taking the part meant that I couldn't call someone else.)
The company said that they speak English, which they do, on the telephone, but the men that they sent weren't English-speaking or really French-speaking, either. The work they did was fine, but I'm just not happy with the bait and switch on the cost or the man's explanation for it.
I learned a lot of lessons from this experience (what a costly learning curve, though!), number one being CALL KAECH! Next time, I will ask the electrician if he is able to jam up the shower curtain rod for me, if I pay him on the side.
Also, if you have an AEG appliance, I have a great guy who comes out in the evening time. (I don't have his number handy, though, so message me).
misskate, Jul 11, 2007 @ 19:49
Partly my fault, I didn't get an actual estimate beforehand, but went with what the woman said over the phone of CHF130. Plus the men diddled around for two hours on the first visit, drilled through the bathroom wall into the living room and said that they had to come back and took a part of the fan with them, so I couldn't call somebody else to finish the job. (though I don't think that that was their reason for taking the part with them, just that them taking the part meant that I couldn't call someone else.)
The company said that they speak English, which they do, on the telephone, but the men that they sent weren't English-speaking or really French-speaking, either. The work they did was fine, but I'm just not happy with the bait and switch on the cost or the man's explanation for it.
I learned a lot of lessons from this experience (what a costly learning curve, though!), number one being CALL KAECH! Next time, I will ask the electrician if he is able to jam up the shower curtain rod for me, if I pay him on the side.
Also, if you have an AEG appliance, I have a great guy who comes out in the evening time. (I don't have his number handy, though, so message me).
misskate, Jul 11, 2007 @ 19:49
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 6
Jul 11, 2007 @ 20:17
for the info! I will let you know how things work out!
The text you are quoting:
for the info! I will let you know how things work out!
kimmimz, Jul 11, 2007 @ 20:17
kimmimz, Jul 11, 2007 @ 20:17
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 7
Jul 11, 2007 @ 21:43
Hi. I'm from the US and brought one lamp with me. I bought a new lightbulb here in Switzerland and plugged the lamp in (using a plug adaptor US-EU) and it works great. No need to rewire anything or use a xfmr. Just buy a new bulb, use a plug adapter and you're done.
The text you are quoting:
Hi. I'm from the US and brought one lamp with me. I bought a new lightbulb here in Switzerland and plugged the lamp in (using a plug adaptor US-EU) and it works great. No need to rewire anything or use a xfmr. Just buy a new bulb, use a plug adapter and you're done.
okgood, Jul 11, 2007 @ 21:43
okgood, Jul 11, 2007 @ 21:43
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 8
Jul 12, 2007 @ 06:32
Contact me on 079 525 2710 and I will gladly rewire the lamps.
Simon
Simon
The text you are quoting:
Contact me on 079 525 2710 and I will gladly rewire the lamps.
Simon
DJ_Symcard, Jul 12, 2007 @ 06:32
Simon
DJ_Symcard, Jul 12, 2007 @ 06:32
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 9
Jul 12, 2007 @ 13:56
I will try that right away! If it doen't work...I will go directly to the next reply! :)
The text you are quoting:
I will try that right away! If it doen't work...I will go directly to the next reply! :)
kimmimz, Jul 12, 2007 @ 13:56
kimmimz, Jul 12, 2007 @ 13:56
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 10
Jul 12, 2007 @ 13:58
I will give you a call next week regarding the lamps. I have company coming in tomorrow, and I have a lot to do. Thank you. Are you an electrician? I live in Chambesy, are you nearby?
The text you are quoting:
I will give you a call next week regarding the lamps. I have company coming in tomorrow, and I have a lot to do. Thank you. Are you an electrician? I live in Chambesy, are you nearby?
kimmimz, Jul 12, 2007 @ 13:58
kimmimz, Jul 12, 2007 @ 13:58
Your Reply:
Only members can see names and photos
Re: Know anyone who can rewire American lamps?
Post 11
Jul 12, 2007 @ 15:28
I live in Bernex, I am trained in Electrical installations and house wiring.
The text you are quoting:
I live in Bernex, I am trained in Electrical installations and house wiring.
DJ_Symcard, Jul 12, 2007 @ 15:28
DJ_Symcard, Jul 12, 2007 @ 15:28
Your Reply:



