Forums in Geneva > Geneva > Naxoo
Only members can see names and photos
Naxoo
Apr 29, 2007 @ 22:54
Does anyone know if Naxoo works with a British TV? Or do I need to get a swiss one?
The text you are quoting:
Does anyone know if Naxoo works with a British TV? Or do I need to get a swiss one?
SarahJaneApr 29, 2007 @ 22:54
SarahJaneApr 29, 2007 @ 22:54
Your Reply:
Only members can see names and photos
Re: Naxoo
Post 1
May 1, 2007 @ 13:51
does not depend on the TV you have, but on the connection that has to be installed by Naxoo. Just make sure your British TV is compatible with the voltage in Switzerland and that you have an adaptor for the plug. It should be OK.
The text you are quoting:
does not depend on the TV you have, but on the connection that has to be installed by Naxoo. Just make sure your British TV is compatible with the voltage in Switzerland and that you have an adaptor for the plug. It should be OK.
Iolly, May 1, 2007 @ 13:51
Iolly, May 1, 2007 @ 13:51
Your Reply:
Only members can see names and photos
Re: Naxoo
Post 2
May 1, 2007 @ 21:18
it is connected to your TV's AV input (either Euro SCART or RCA type). If your TV is from the UK, you'll have to check with NAXOO if the decoder (Accessbox or Drivebox) supports output to PAL-I broadcast standard (UK). The default standard in CH is PAL B/G.
I know my older NAXOO decoder (Vistar decoder) has PAL I option in the systems settings. If your TV is multi-standard, then there should be no issue with broadcast standards.
I know my older NAXOO decoder (Vistar decoder) has PAL I option in the systems settings. If your TV is multi-standard, then there should be no issue with broadcast standards.
The text you are quoting:
it is connected to your TV's AV input (either Euro SCART or RCA type). If your TV is from the UK, you'll have to check with NAXOO if the decoder (Accessbox or Drivebox) supports output to PAL-I broadcast standard (UK). The default standard in CH is PAL B/G.
I know my older NAXOO decoder (Vistar decoder) has PAL I option in the systems settings. If your TV is multi-standard, then there should be no issue with broadcast standards.
Novecento, May 1, 2007 @ 21:18
I know my older NAXOO decoder (Vistar decoder) has PAL I option in the systems settings. If your TV is multi-standard, then there should be no issue with broadcast standards.
Novecento, May 1, 2007 @ 21:18
Your Reply:



