Login or Sign Up
 
 
 
 
 
 
 
 
 
 
 
 
 
Forums in Geneva > Geneva > Purchased some overhead lights - now what...
 
Only members can see photos
Only members can see names and photos
Purchased some overhead lights - now what...
Hello GOLers... If this has been covered please let me know (I can't seem to find any search functions in the GOL site layout). I purchased some overhead lights to replace the bare bulbs left to me by my landlord and I went to mount them and I found out I have cement ceilings - which means screwing anything into it involves masonry bits, drills, and molly bolts. Yikes. Though I do appreciate the Swiss use of cement for sturdiness, I have no idea how I'm going to hang these lights. There is a plastic inverted cup/cavity which contains the wiring bits, but no standard mounting holes as we'd find in the US version. Any help would be greatly appreciated.

Thanks,
David.
The text you are quoting:
Hello GOLers... If this has been covered please let me know (I can't seem to find any search functions in the GOL site layout). I purchased some overhead lights to replace the bare bulbs left to me by my landlord and I went to mount them and I found out I have cement ceilings - which means screwing anything into it involves masonry bits, drills, and molly bolts. Yikes. Though I do appreciate the Swiss use of cement for sturdiness, I have no idea how I'm going to hang these lights. There is a plastic inverted cup/cavity which contains the wiring bits, but no standard mounting holes as we'd find in the US version. Any help would be greatly appreciated.

Thanks,
David.
dbdaveNov 19, 2006 @ 23:27
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
 
10 Replies | 1349 Views      |  Send to friend
 
Only members can see photos
Only members can see names and photos
Re: Purchased some overhead lights - now what...
Post 1
sounds like a job for a handyman...When I run into these things I call someone, cos the risk of screwing it up (atleast for me) is big.

If you want a cheap one, let me know and I will forward you mine.

Sorry I can't help more...
The text you are quoting:
sounds like a job for a handyman...When I run into these things I call someone, cos the risk of screwing it up (atleast for me) is big.

If you want a cheap one, let me know and I will forward you mine.

Sorry I can't help more...

Nir Ofek, Nov 20, 2006 @ 11:31
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
Only members can see photos
Only members can see names and photos
Re: Purchased some overhead lights - now what...
Post 2
Thanks for the reply! Well the plastic cup is upside down facing the floor and embedded into the ceiling so the opening is flush with the ceiling. It's about 4.5 inches in diameter, and about 4 inches deep. All the wiring is crammed in there. And our lonely bulb is hanging by two wires :) There doesn't appear to be a transverse metal rod, just wires. The building is 2001 construction so I assume this is the standard way swiss receptacles are setup. I purchased fixtures from Intereo and they seem to imply you just screw them into the ceiling, not sure if that applies in my case. And there were some left over lamps from Ikea that appear to need a hook of some sort that I thought would be hanging inside the cup that would support the weight of the fixture. But.. no such luck. Again, thanks for any help from the handymen & handywomen of the boards.

Dave.
The text you are quoting:
Thanks for the reply! Well the plastic cup is upside down facing the floor and embedded into the ceiling so the opening is flush with the ceiling. It's about 4.5 inches in diameter, and about 4 inches deep. All the wiring is crammed in there. And our lonely bulb is hanging by two wires :) There doesn't appear to be a transverse metal rod, just wires. The building is 2001 construction so I assume this is the standard way swiss receptacles are setup. I purchased fixtures from Intereo and they seem to imply you just screw them into the ceiling, not sure if that applies in my case. And there were some left over lamps from Ikea that appear to need a hook of some sort that I thought would be hanging inside the cup that would support the weight of the fixture. But.. no such luck. Again, thanks for any help from the handymen & handywomen of the boards.

Dave.
dbdave, Nov 20, 2006 @ 12:20
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
Only members can see photos
Only members can see names and photos
Re: Purchased some overhead lights - now what...
Post 3
Bob - thanks much for that advice. In fact I did see the putty but I was hesitant to remove it. I will now, and I'll try to keep my eye out for fixtures that match that hole pattern, looks like the previous tenant had all sorts of different fixtures up there. And can I ask where you rented a drill (even though the Home Depot genes in me say - buy a new drill)!
The text you are quoting:
Bob - thanks much for that advice. In fact I did see the putty but I was hesitant to remove it. I will now, and I'll try to keep my eye out for fixtures that match that hole pattern, looks like the previous tenant had all sorts of different fixtures up there. And can I ask where you rented a drill (even though the Home Depot genes in me say - buy a new drill)!

dbdave, Nov 20, 2006 @ 13:23
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
Only members can see photos
Only members can see names and photos
Re: Purchased some overhead lights - now what...
Post 4
So I just returned from the big Migros MPark near Carouge and I'm truly impressed. It definitely took care of my Home Depot cravings. Maybe I'm the last to discover that place but they have it all - wood, metal, glass, every kind of rope, bolt or nut. And yes, got my powertool-fix-on. Thanks again Bob.
The text you are quoting:
So I just returned from the big Migros MPark near Carouge and I'm truly impressed. It definitely took care of my Home Depot cravings. Maybe I'm the last to discover that place but they have it all - wood, metal, glass, every kind of rope, bolt or nut. And yes, got my powertool-fix-on. Thanks again Bob.
dbdave, Nov 20, 2006 @ 20:17
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
Only members can see photos
Only members can see names and photos
Re: Purchased some overhead lights - now what...
Post 5
seems like you are sorted, but for people who want a less involved fix, if you have the bare bulb hanging you can get those round lantern like shades from IKEA (as well as other places) for like 2-5 swiss francs each. they hook directly onto the bulb wire, no drilling required!
The text you are quoting:
seems like you are sorted, but for people who want a less involved fix, if you have the bare bulb hanging you can get those round lantern like shades from IKEA (as well as other places) for like 2-5 swiss francs each. they hook directly onto the bulb wire, no drilling required!
sara_cali, Dec 2, 2006 @ 13:56
Your Reply:
Reply  Reply With Quote  Thank Poster
! Report to Admin
10 Replies | 1349 Views      |  Send to friend
 
 
 
Feedback Form